Google+
(866) 260-2121

Lasting Fastening

Post Channel Brackets - Type 316 SS

Be the first to review this product

Type 316L low carbon stainless steel post channel bracket help eliminate toe nailing and secures wood post or columns to decking. These brackets are handy for connections as a base or cap and anchors rail posts to deck or cross members to beam. The bottom center hole of the bracket is 3/4" in diameter. Both sides of brackets have one 5/8" diameter hole and three 3/16" diameter nail holes. The bracket requires one 1/2" x 5-1/2" Type 316L Stainless Steel wedge anchor stud.

Availability: In stock

Product Name Part# Price Qty
4" x 4" Post Channel Brackets Type 316L SS SPCB44
$22.50
6" x 6" Post Channel Brackets Type 316L SS SPCB66
$26.25

Description

Details

Type 316L low carbon stainless steel post channel bracket help eliminate toe nailing and secures wood post or columns to decking. These brackets are handy for connections as a base or cap and anchors rail posts to deck or cross members to beam. The bottom center hole of the bracket is 3/4" in diameter. Both sides of brackets have one 5/8" diameter hole and three 3/16" diameter nail holes. The bracket requires one 1/2" x 5-1/2" 316L Stainless Steel wedge anchor stud. 

Features:

  • Solid Type 316L Stainless Steel alloy meets AISI standards
  • For 4" x 4" & 6" x 6" dimensional lumber
    • 4" x 4" Overall bracket size: 3-1/2"H x 3-5/8"ID x 3-1/2"H x 3-1/4" wide straps
    • 6" x 6" Overall bracket size: 3-1/2"H x 5-5/8"ID x 3-1/2"H x 5-1/4" wide straps
  • 3/4" diameter hole locate at center bottom
  • Both side of bracket has one 5/8" diameter hole and three 3/16" nail holes
  • Requires one 1/2" x 5-1/2" Stainless Steel wedge anchor stud
  • Virtually imperious to salt, sand and ocean spray
  • Engineered data load capacities adheres to Uniform Building Code

Additional Info

Additional Info

Specification

POST CHANNEL BRACKETS - LOAD CAPACITIES

GENERAL NOTES

  • Load capacity values are reported in pounds.
  • All values reported are determined using Hem-Fir wood. Adjustments must be made for use with other wood species.
  • Brackets are not recommended for use with non-supported top members (i.e., cantilever posts).
  •  All specified fasteners must be used to obtain full load capacity values.
  • All load capacities shown are based on dry moisture content conditions. For moisture contents that are not dry at fabrication or in-service, the user must use the National Design Specification (NDS) to appropriately adjust the load capacities.
  • Uplift capacities are increased for seismic and wind loads by 33% and 60%. When other load conditions exist, no increase is allowed.
  • All nails are stainless steel common nails, unless otherwise specified.
  • Load capacities for multiple directions cannot be added together. A design load that can be divided into components In the direction of the given load capacity must be evaluated as follows:
    • o Design Uplift/Allowable Uplift + Design Lateral/Allowable Lateral < 1.0
  • Load capacities were determined using the 1991 National Design Specification in accordance with the 1997 Uniform Building Code (UBC).

Post Channel Bracket

 

 

 

 

Download

Uplift

Lateral

 

Nails

1.00

1.00

1.33

1.6

1.00

PCB44

6 – 16d

1361

273

364

437

738

PCB66

6 – 16d

1361

105

140

168

738

CONNECTION SPECIFIC NOTES:

Download capacity is based on the wood bearing area. The area is the base of the post, excluding a 1-9/16" diameter circular area cut out to fit over the top of the bottom board. Post channel brackets also require the use of a 5/8" diameter bolt through the bottom of the connection. The bolt must be designed for proper anchorage by the user.

Additional Info No

Reviews

Write Your Own Review

You're reviewing: Post Channel Brackets - Type 316 SS

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.