Google+
(866) 260-2121

Stainless Steel Driven

Post-to-Beam Brackets - Type 316 SS

Be the first to review this product

Made of Type 316L low carbon stainless steel, these brackets serve as an easy and secure connection between post and beam, and provides stronger than angled nailing or screw fastening. The design of the brackets reduces the chance of the post splitting and eliminates nailing into end grain, offering greater holding power. This product was developed to help resist lateral and uplift forces. Each side of strap has one 5/8" diameter hole and three 3/16" diameter nail holes.

Availability: In stock

Product Name Part# Box Count Price Qty
4" x 4" Post-to-Beam Brackets Type 316L SS SPB44 Ea
$34.40
4" x 6" Post-to-Beam Brackets Type 316L SS SPB46 Ea
$54.70
6" x 6" Post-to-Beam Brackets Type 316L SS SPB66
$54.70

Description

Details

Made of Type 316L low carbon stainless steel, these brackets serve as an easy and secure connection between post and beam, and provides stronger than angled nailing or screw fastening. The design of the brackets reduces the chance of the post splitting and eliminates nailing into end grain, offering greater holding power. This product was developed to help resist lateral and uplift forces. Each side of strap has one 5/8" diameter hole and three 3/16" diameter nail holes.

Features:

  • Solid Type 316L Stainless Steel alloy meets AISI standards
  • For 4" x 4" to 4" x 4" Posts - Overall size of top/bottom buckets: 3-1/2"H x 3-5/8"ID x 3-1/2"H x 3-1/4" wide straps
  • For 6" x 6" to 6" x 6" Posts - Overall size of top/bottom buckets: 3-3/16"H x 5-5/8"ID x 3-3/16"H x 5-1/4" wide straps
  • Other post sizes: 4" x 6" to 4" x dimensional lumber
    • Top bucket of the bracket: 3-1/2"H x 5-5/8"ID x 3-1/2"H x 3-1/4" wide strap
    • Bottom bucket: 3-1/2"H x 3-5/8"ID x 3-1/2"H x 3-1/4" wide strap
  • Made of 16 ga thick material
  • Each side of strap has one 5/8" diameter hole and three 3/16" diameter nail holes
  • Virtually imperious to salt, sand and ocean spray
  • Engineered data load capacities adheres to Uniform Building Code

Additional Info

Additional Info

Specification

 

POST / BEAM BRACKETS - LOAD CAPACITIES

GENERAL NOTES

  • Load capacity values are reported in pounds.
  • All values reported are determined using Hem-Fir wood. Adjustments must be made for use with other wood species.
  • Brackets are not recommended for use with non-supported top members (i.e., cantilever posts).
  •  All specified fasteners must be used to obtain full load capacity values.
  • All load capacities shown are based on dry moisture content conditions. For moisture contents that are not dry at fabrication or in-service, the user must use the National Design Specification (NDS) to appropriately adjust the load capacities.
  • Uplift capacities are increased for seismic and wind loads by 33% and 60%. When other load conditions exist, no increase is allowed.
  • All nails are stainless steel common nails, unless otherwise specified.
  • All bolts are stainless steel and are specified by diameter.
  • Load capacities formultiple directions cannot be added together. A design load that can be divided into components In the direction of the given load capacity must be evaluated as follows:
    • o Design Uplift/Allowable Uplift + Design Lateral/Allowable Lateral < 1.0
  • Load capacities were determined using the 1991 National Design Specification in accordance with the 1997 Uniform Building Code (UBC).

Post / Beam Bracket

 

 

 

 

Download

Uplift

Lateral

 

Nails

1.00

1.00

1.33

1.60

1.00

PB44

12 – 16d

4961

738

984

1181

738

PB46

 12 – 16d

7796

738

984

1181

738

PB66

12 – 16d

12251

738

984

1181

738

 

Additional Info No

Reviews

Write Your Own Review

You're reviewing: Post-to-Beam Brackets - Type 316 SS

Tags

Tags

Use spaces to separate tags. Use single quotes (') for phrases.